Smart Sense
High-End Commercial Solar Security Light
A fully automatic solar security light for parking entrances, perimeter areas, access points and other off-grid outdoor locations where dependable nighttime visibility and motion-responsive illumination are needed without mains wiring.
SKU: HECSSL-M
Automatic security lighting where running power is impractical.
The HECSSL-M combines a 64-LED array, dusk-to-dawn automation and motion-responsive output in a self-contained fixture supplied with both wall and pole mounting options.
Higher output when activity is detected.
The fixture operates after dark at its normal lighting level and doubles its output when motion is detected, then returns to normal output after approximately 60 seconds.
Automatic dusk-to-dawn operation
Solar and motion electronics are integrated into the fixture, allowing automatic nighttime operation without a manual switch.
64 high-powered LEDs
The LED array provides continuous nighttime illumination with a stronger motion-triggered level for entrances, yards, pathways and other security-sensitive outdoor areas.
Wall or pole mounting
Both wall and pole mounts are included, giving the fixture flexibility for different outdoor layouts. A mounting pole itself is not included.
No mains electrical feed required
The integrated solar system makes the light useful for locations where trenching or extending conventional electrical service would be inconvenient or costly.
HECSSL-M at a glance
Current verified product characteristics covering the LED array, automatic control behavior, motion response and mounting options.
- LED array
- 64 LEDs High-powered LED light sources
- Night operation
- Automatic Turns on after dark
- Motion response
- 2× output Doubles output when motion is detected
- Motion hold
- ≈60 sec Then returns to normal output
- Normal level
- 50W equivalent Electric-light equivalence
- Motion level
- 100W equivalent Electric-light equivalence
- Solar system
- Integrated Self-contained solar electronics
- Motion system
- Integrated Built-in motion electronics
- Wall mounting
- Included Wall mount supplied
- Pole mounting
- Included Pole mount supplied
- Operation
- Fully automatic No manual nighttime switching
- Pole
- Not included Separate support required
01 What is the HECSSL-M designed for?
The HECSSL-M is designed for outdoor locations that need automatic nighttime visibility plus a stronger response when movement is detected. Typical applications include entrances, yards, pathways, gates and other off-grid security-lighting points.
Its self-contained solar design is particularly useful where extending mains electrical service would be inconvenient.
02 Does the light stay on all night or only when motion is detected?
The fixture turns on after dark at its normal lighting level. Motion detection does not simply switch the light on from an off state; instead, detected movement doubles the light output.
After approximately 60 seconds, the fixture returns to its normal nighttime output.
03 How bright is the normal mode compared with the motion mode?
The normal operating level is described as comparable to a 50-watt electric light, while the motion-triggered level is described as comparable to a 100-watt electric light.
These are equivalence figures rather than measured lumen ratings, so they should not be treated as photometric data for a formal lighting calculation.
04 How many LEDs does the fixture use?
The HECSSL-M uses 64 high-powered LED light sources.
The LED array works with the automatic nighttime and motion-control system rather than requiring manual switching.
05 Can the HECSSL-M be mounted on a wall?
Yes. A wall mount is included with the fixture, making it suitable for building-mounted applications where the solar exposure and lighting position are appropriate.
Before installation, check that the selected location gives the solar collection surface adequate access to direct sunlight.
06 Can it also be installed on a pole?
Yes. Pole-mounting hardware is included as well as the wall mount.
The supporting pole itself is not included, so the final support and installation method must be appropriate for the site and fixture.
07 Does it require electrical wiring from the building?
No mains electrical feed is required for normal operation. The solar and motion electronics are integrated into the light.
This can avoid trenching or extending grid power to remote outdoor locations, although the fixture still needs a secure mounting point and adequate solar exposure.
08 How does the motion sensor change the light output?
When motion is detected, the fixture doubles its normal output. The higher-output state lasts for approximately 60 seconds before the light returns to its normal nighttime level.
This behavior provides stronger illumination around activity while retaining automatic continuous nighttime operation.
09 Why are some older specifications not listed here?
Some historical listings for this product family contain technical figures that are not present in the current product information and, in some cases, conflict with later versions.
Greenlytes therefore lists the current characteristics that can be verified consistently rather than presenting uncertain legacy figures as current specifications.
Add automatic solar security lighting without extending mains power
If the HECSSL-M matches your mounting location and security-lighting needs, return to the purchase area to choose your quantity.
- Secure checkout
- Clear product details
- Easy ordering